Axial filter tubes

Axiale uitvoering zonder langslasnaad (cilinder, FITO)

axial1 axial2

Applied for filtration from the inside to the outside.In this type of design, the gap openings are parallel to the length of the cylinder. The inner diameter or work surface is smooth. The support bars are located radially on the outside of the filter. The ends of the support bars are welded together in order to get a longitudinal seam.

This cylinder version is usually used in conjunction with an Archimedes screw or scraper inside which cleans the cylinder.
The cylinders with longitudinal seam are usually made for filter systems with larger diameters (larger than 130 mm).

Cylinders directly produced on our machine have much more narrow tolerances, then the execution with weldingseam. At the end of each cylinderside we weld the wire with a very narrow slot, so the end pieces can be welded to the cyclinder much better.

Axial design with weldingseam (cylinder, FITO)

axial3 axial4

home80x34
Copyright 2022 © | All Rights Reserved
Hein | Lehmann B.V. | the Netherlands
sales @ heinlehmann.nl | Tel.: +31(0)70 319 18 26